Dell S2825cdn Users Guide - Page 22
Dell S2825cdn, conditions. See Status of Wi-Fi Button LED.
View all Dell S2825cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Dell S2825cdn 12 3 4 5 789 14 13 12 11 1 (Home) button 2 (Log In/Out) button 3 Touch Panel 4 Ready/Error LED 5 Number Pad 6 (Wi-Fi) button* 7 (Redial/Pause) button 8 (Copy) button 9 (Power) button 10 (NFC) reader* 11 / (Speed Dial 1/ Speed Dial 2) button 12 (Delete) button Moves to the Home screen. Logs out if pressed while the user is logged in. Specifies the settings by directly tapping the screen. Displays various settings, instructions, and error messages. Shows a green light when the printer is ready and a blinking green light when data is being received. Shows an amber light when an error occurs and a blinking amber light when an unrecoverable print error occurs. Enters numbers and characters. Shows a white light when the Wi-Fi® is activated and blinks in certain conditions. See "Status of Wi-Fi Button LED." Re-dials a telephone number. Inserts a pause into a telephone number. When the (Redial/Pause) button is pressed, "-" appears on the touch panel. Starts copying the docum ive only from the Home screen while you are logged in to the printer. Turns on/ the printer or switches the printer between two modes: standby and power saver. • Pressing and releasing the button turns on the printer. To tu the printer, press and hold the button until the Power Management screen appears on the touch panel, and then tap Power Off. • Each press of the button switches the standby and power saver modes alternately. When the printer enters the power saver mode, the button blinks slowly. CAUTION: • Pressing and holding the button for six or more seconds can tur ter immediately. However, note that this may result in the loss of data in memory. Starts communication between the printer and an NFC card or a mobile device with the NFC function when the card or the device is tapped to or waved over the reader. NOTE: • NFC detection may vary with device type. Dials the number registered as "001" or "002" respectively of the FAX Speed Dial ective only when the Home screen is displayed. Deletes numbers and characters. 22 | Printer Overview