Dell S2825cdn Users Guide - Page 166

SNMP Configuration Community Name Trap Notification 1-4 Enable SNMP v1/v2c Protocol Edit SNMP v1/v2c Properties Enable SNMP v3 Protocol Edit SNMP v3 Properties Community Name (Read only)*1 Re-enter Community Name (Read only)*1 Community Name (Read/Write)*1 Re-enter Community Name (Read/Write)*1 Community Name (Trap)*1 Re-enter Community Name (Trap)*1 Trap Address Type Trap Address Port Number Notify Network*2 Authenticate Error Trap Select the check box to enable the SNMP v1/v2c protocol. Click to display the SNMP v1/v2c page and to edit the setting of SNMP v1/v2c protocol from the page. Select the check box to enable the SNMP v3 protocol. Click to display the SNMP v3 page and to edit the setting of SNMP v3 protocol from the page. You can click this item only when SSL/TSL communication is enabled. Sets the community name to access (read only) data using up to 31 alphanumeric characters. The original setting remains valid if no input is made. Characters entered for community name in the previous settings are not displayed on the screen. The default Read Community is public. Enter the community name to access (read only) data again to check it. Sets the community name to access (read and write) data using up to 31 alphanumeric characters. The original setting remains valid if no input is made. Characters entered for community name in the previous settings are not displayed on the screen. The default Read/Write Community is private. Enter the community name to access (read and write) data again to check it. Sets the community name used for trap up to 31 alphanumeric characters. The original setting remains valid if no input is made. Characters entered for Community Name (Trap) in the previous settings are not displayed on the screen. The default Trap Community is " " (NULL). Enter the community name used for trap again to check it. Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format: IPv4 Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of nnn is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value between 0 and 65,535. IPv6 Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of XXXX is a hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65,535. Select the check box to notify Authenticate Error Trap. *1 The default value can be changed by using Dell Printer Configuration Web Tool. 166 | Dell™ Printer Configuration Web Tool