Dell S2825cdn Users Guide - Page 349
Cleaning the DADF Feed Rollers, Moving the Printer
View all Dell S2825cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
1 Duplex Sensor Glass 2 White Strip 6 Gently close the DADF chute cover. 7 Close the document cover. Cleaning the DADF Feed Rollers Keeping the DADF feed rollers clean helps ensure the best possible copies. It is recommended to clean the DADF feed rollers at regular intervals. 1 Open the DADF cover. 2 Wipe the DADF feed rollers with a dry soft lint-free cloth or paper towel until they are clean. If the DADF feed rollers get stained with ink, documents that go through the DADF can also become stained. In this case, slightly dampen a soft lint-free cloth or paper towel with a neutral detergent or water, and then remove the ink stains from the DADF feed rollers until they are clean and dry. Moving the Printer This section describes how to move the printer. WARNING: • Before performing any of the following procedures, read and follow the safety instructions in the Important Information. • If the optional 550-sheet feeder (Tray2) has been installed, uninstall the optional 550-sheet feeder before moving the printer. If the optional 550-sheet feeder is not fixed securely to the printer, it may fall to the ground and cause injuries. See "Removing the Optional 550-Sheet Feeder." 1 Turn off the printer, and then disconnect the power cord, interface cable, and any other cables. Maintaining Your Printer | 349