Dell S2825cdn Users Guide - Page 88

❚ Admin Settings > PCL > Draft Mode Specifies whether to enable the Draft Mode feature, which saves toner by printing in the Draft Mode. The print quality is reduced when printing in the Draft Mode. ❚ Admin Settings > PCL > Line Termination Adds the line termination commands. Off Add-LF Add-CR CR-XX The line termination command is not added. CR=CR, LF=LF, FF=FF The LF command is added. CR=CR-LF, LF=LF, FF=FF The CR command is added. CR=CR, LF=CR-LF, FF=CR-FF The CR and LF commands are added. CR=CR-LF, LF=CR-LF, FF=CR-FF ❚ Admin Settings > PCL > Default Color Specifies the color mode. This setting is used for a print job that does not specify a Print Mode. ❚ Admin Settings > PCL > Ignore Form Feed Specifies whether to enable the Ignore Form Feed feature, which ignores blank pages that only contain form feed control codes. ❚ Admin Settings > PS Use the PS (PostScript) menu to change printer settings that only affect jobs using the PostScript 3 Compatible emulation printer language. ❚ Admin Settings > PS > PS Error Report Specifies whether to enable the PS Error Report feature, which specifies the contents of the errors concerning PostScript 3 Compatible page description language are printed. The change becomes effective after the printer is turned off and then on again. NOTE: • Instructions from the PS driver override the settings specified on the operator panel. ❚ Admin Settings > PS > PS Job Time-out Specifies whether to enable the PS feature, which specifies the execution time for one PostScript 3 Compatible job. The change becomes effective after the printer is turned off and then on again. 88 | Understanding the System Menus