Dell S2825cdn Users Guide - Page 32

Turning Off the Printer NOTE: • The data in the memory is cleared when the printer is turned off. Press and hold the (Power) button until the Power Management screen appears on the touch panel, and then tap Power Off. CAUTION: • Pressing and holding the button for six or more seconds can turn off the printer immediately. However, note that this may result in the loss of data in memory. Setting Initial Settings on the Operator Panel You need to set the printer language, country, clock date, time, and fax settings when the printer is turned on for the first time. When you turn the printer on, the wizard screen to perform the initial setup appears on the touch panel. Perform the following procedure to set the initial settings. NOTE: • If you do not start configuring the initial settings, the printer restarts in 3 minutes, and the Home screen appears on the touch panel. After that, you can set the following initial setup by enabling the Power On Wizard on the touch panel from: The (Information) button Tools tab Admin Settings System Settings General Power On Wizard. You can also set the same setting using Dell Printer Configuration Web Tool. See "Dell™ Printer Configuration Web Tool." 1 Turn on the printer. 2 Tap until desired language appears, and then tap the desired language. 3 Tap Next Time Zone. 4 Tap until the desired geographic region appears, and then tap the desired geographic region. 5 Tap until the desired time zone appears, and then tap the desired time zone. 32 | Turning On/Off the Printer