HP 4600 HP color LaserJet 4600 Series - User Guide - Page 139
INCORRECT COLOR, READY, the control panel should display - toner cartridge
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
14 15 16 17 18 ENWW 4 Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling. 5 Grasp both sides of the cartridge and distribute the toner by gently rocking the cartridge from side to side. 6 Remove the orange shipping lock from the new print cartridge. Discard the lock. 7 Remove the inside sealing tape by breaking the orange tab on the end of the new print cartridge and pulling the tape completely out. Discard the tape. 8 Align the print cartridge with the tracks inside the printer and insert the cartridge until it is completely seated. Note If a cartridge is in the wrong slot, the control panel will display the message INCORRECT COLOR. 9 Close the front cover and then close the top cover. After a short while, the control panel should display READY. 10 Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions. 11 If you are using a non-HP print cartridge, check the control panel for further instructions. For additional help, go to http://www.hp.com/support/lj4600. 125