HP 4600 HP color LaserJet 4600 Series - User Guide - Page 46

Changing printer control panel configuration settings CAUTION Note By using the printer control panel, you can make changes to general printer configuration default settings such as tray size and type, PowerSave time, printer personality (language), and jam recovery. The printer control panel can also be accessed from a computer by using the setting page of the embedded Web server. The computer shows the same information that the control panel shows. For more information, see Using the embedded Web server. Configuration settings seldom need to be changed. Hewlett-Packard recommends that only the system administrator change configuration settings. Job storage limit This option sets the limit for the maximum number of jobs stored on the hard disk at the printer. The maximum number allowed is 100, and the default value is 32. This option is only available if a hard disk is installed. To set the job storage limit 1. Press ✔ to enter the MENUS. 2. Press  to highlight CONFIGURE DEVICE. 3. Press ✔ to select CONFIGURE DEVICE. 4. Press  to highlight SYSTEM SETUP. 5. Press ✔ to select SYSTEM SETUP. 6. Press ✔ to select JOB STORAGE LIMIT. 7. Press  or  to change the value. 8. Press ✔ to set the value. 9. Press PAUSE/RESUME. 32 ENWW