HP 4600 HP color LaserJet 4600 Series - User Guide - Page 166

Message Description Action TRAY XX (TYPE) (SIZE) The printer is reporting the current Size specified by user configuration of tray XX. The tray switch is in the CUSTOM position. alternates with 1. To change media type, press ✔. Use  and  to highlight the type, then press ✔ to select. TRAY XX (TYPE) (SIZE) To change type press ✔ 2. To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, set the tray switch to the STANDARD position and adjust the media guides to the correct positions. 3. To change the media size to other sizes, leave the tray switch in the CUSTOM position, adjust the media guides against the media, and close the tray. 4. Select the paper handling menu from the control panel. Configure the size for the tray. 5. See Configuring input trays for more details. Unable to mopy job A Mopy job cannot be mopied No action necessary. because of a memory, disk, or configuration problem. Only one copy will be produced. Unable to store job A job cannot be stored because of a memory, disk, or configuration problem. Install additional memory in the printer, or install a disk drive into the printer. If a disk drive is installed, delete previously stored print jobs. USE INSTEAD? TRAY 2: [TYPE] [SIZE] TRAY 3: [TYPE] The printer is offering a selection of alternate media to use for the print job. Highlight the media with  and . Press ✔ to select a choice. Validating supplies For menus press ✔ alternates with A new cartridge has been installed and the printer is determining whether it is an HP or non-HP cartridge. No action necessary. Ready For menus press ✔ 152 ENWW