HP 4600 HP color LaserJet 4600 Series - User Guide - Page 165
Tray Xx Size= <xxxx, Tray Xx Open For Help
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Message Description TRAY XX OPEN For help The specified tray is open or not press V closed completely. Action Close the tray. alternates with Ready For menus press ✔ TRAY XX SIZE= For help press V alternates with TRAY XX SIZE= To change, move switch in tray XX A non-detectable media size was selected from the menu and the tray switch is set to STANDARD. The size selected from the menu does not match the size detected by the tray. Size detection occurs when the tray switch is set in the STANDARD position. 1. Adjust the side and rear media guides against the paper. 2. If the media used is Letter, A4, Executive, B5 JIS, A5, or Legal sized, the tray switch should be set to STANDARD. Set the tray switch to CUSTOM for all other media sizes. The tray switch must be set before the size can be selected from the control panel. 3. Reset the paper size in the paper handling menu. TRAY XX (TYPE) (SIZE) Size detected by tray alternates with The printer is reporting the current configuration of tray XX. The tray switch is in the STANDARD position. TRAY XX (TYPE) (SIZE) To change type press ✔ 1. To change media type, press ✔. Use and to highlight the type, then press ✔ to select. 2. To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, leave the tray switch in the STANDARD position. 3. To change the media size to other sizes, move the tray switch to CUSTOM, adjust the paper guides against the paper, and close the tray. 4. Use and to highlight the media size, then press ✔ to select. ENWW 151