HP 4600 HP color LaserJet 4600 Series - User Guide - Page 187

Printer feeds incorrect page size The custom/standard switch in the tray is not in the correct position. Verify that the switch is in the correct position for the media size. Printer pulls from incorrect tray Cause You are using a driver for a different printer. The specified tray is empty. Tray behavior for the requested tray is set to FIRST in the system setup submenu of the configure device menu. The media size is not configured correctly for the input tray. The guides in the tray are not against the paper. The custom/standard switch in the tray is not in the correct position. Solution Use a driver for this printer. Load media in the specified tray. Change the setting to EXCLUSIVELY. Print a configuration page or use the control panel to determine the media size for which the tray is configured. Verify that the guides are touching the paper. Verify that the switch is in the correct position for the media size. Media does not feed automatically Cause Manual feed is selected in the software application. The correct size media is not loaded. The input tray is empty. Media from a previous jam has not been completely removed. The media size is not configured correctly for the input tray. The guides in the tray are not against the paper. The custom/standard switch in the tray is not in the correct position. Solution Load Tray 1 with media, or, if the media is loaded, press ✔. Load the correct size media. Load media into the input tray. Open the printer and remove any media in the paper path. Closely inspect the fuser area for jams. See Paper jams. Print a confirmation page or use the control panel to determine the media size for which the tray is configured. Verify that the guides are touching the paper. Verify that the switch is in the correct position for the media size. ENWW 173