HP 4600 HP color LaserJet 4600 Series - User Guide - Page 164

Message Setting saved SIZE MISMATCH TRAY XX= For help press V alternates with Ready For menus press ✔ Test terminated TRAY XX CONTAINS UNKNOWN MEDIA TRAY XX EMPTY (TYPE) (SIZE) alternates with Description A menu selection has been saved. The tray is loaded with media longer or shorter in the feed direction than the size configured for the tray. A diagnostic test has been terminated by pressing the CANCEL JOB button. The media type in the specified tray cannot be determined. The specified tray is empty and needs to be filled but the current job does not need this tray to print correctly. Action No action necessary. 1. Adjust the side and rear media guides against the paper. 2. If the media used is Letter, A4, Executive, B5 JIS, A5, or Legal sized, the tray switch should be set to STANDARD. Set the tray switch to CUSTOM for all other media sizes. The tray switch must be set before the size can be selected from the control panel. 3. Reset the paper size in the paper handling menu. No action necessary. 1. To change media type, press ✔. Use  and  to highlight the type, then press ✔ to select. 2. To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, leave the tray switch in the STANDARD position. 3. To change the media size to other sizes, move the tray switch to CUSTOM, adjust the paper guides against the paper, and close the tray. 4. Use  and  to highlight the media size, then press ✔ to select. Refill the tray at a convenient time. Ready For menus press ✔ 150 ENWW