HP 4600 HP color LaserJet 4600 Series - User Guide - Page 152

Message FLASH FILE OPERATION FAILED alternates with Ready For menus press ✔ FLASH FILE SYSTEM IS FULL alternates with Ready For menus press ✔ FLASH IS WRITE PROTECTED alternates with Ready For menus press ✔ Genuine HP cartridge installed Genuine HP supplies installed INCORRECT CARTRIDGE alternates with For status press ✔ Incorrect PIN Description Action The printer received a PJL file system 1. Printing may continue. command that attempted to perform 2. Turn the printer off and an illogical operation (for example, to then back on. download a file to a non-existent directory). 3. If the message reappears, there may be a problem with the software application. The printer received a PJL file system 1. Use HP Web Jetadmin command that attempted to store software to delete files something on the file system but was from the Flash Memory unsuccessful because the file system and try again. is full. 2. To remove this message from the display, turn the printer off and then back on. The file system device is protected and no new files can be written to it. 1. To enable writing to the Flash Memory, turn off write protection, using HP Web Jetadmin. 2. To remove this message from the display, turn the printer off and then back on. A new HP cartridge has been No action necessary. installed. The printer returns to the READY state after approximately 10 seconds. A new HP cartridge has been No action necessary. installed. The printer returns to the READY state after approximately 10 seconds. An incorrect cartridge is installed in a 1. Press ✔ and then press slot and the cover is closed. V for help. 2. Press  and  to step through the instructions. The wrong PIN was entered. Re-enter PIN correctly. After three incorrect PIN entries, the printer will return to READY. 138 ENWW