HP 4600 HP color LaserJet 4600 Series - User Guide - Page 62
Configuring TCP/IP parameters, To con the Novell NetWare parameters from
UPC - 808736060875
View all HP 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Note Note 48 To configure the Novell NetWare parameters from the printer control panel 1. Press ✔ to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press ✔ to select CONFIGURE DEVICE. 4. Press to highlight I/O. 5. Press ✔ to select I/O. 6. Press to highlight EIO X (where X = 1, 2, or 3). 7. Press ✔ to select EIO X. 8. Press to highlight NOVELL. 9. Press ✔ to select NOVELL. 10. Press to highlight FRAME. 11. Press ✔ to select FRAME. 12. Press the PAUSE/RESUME button to return to the ready state. The default frame type value for the HP Color LaserJet 4600 is automatic. Configuring TCP/IP parameters You can use the printer control panel to configure the following TCP/IP parameters: z usage of the BOOTP file for configuration parameters (the default is to use the BOOTP file) z IP address (4 bytes) z subnet mask (4 bytes) z default gateway (4 bytes) z TCP/IP connection timeout (in seconds) Do not disable BOOTP if you will be using RARP or DHCP to configureTCP/IP parameters. To automatically configure TCP/IP parameters from the printer control panel 1. Press ✔ to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. ENWW