HP 750c HP DesignJet 700 user guide - Page 30
When the word
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setting Up the Plotter Setup Task 3: Switch On and (Optional) Change the language From English If English not OK 4 or if you want to change the language Hold down the Enter key on the front panel and then switch on the plotter by pushing the power switch. 1 Press and hold Enter 2 Switch on Release the Enter key when "STATUS / Initializing" appears on the front-panel screen. If there is no sound, nor any light on the front panel, you have a power problem. 1843a 5 When the word "English" appears on the front-panel screen, press the ↑ or ↓ key until your language appears. Then press Enter. LANGUAGE English ↑ ↓ Enter 0014 1-10
1-10
4
Hold down the
Enter
key on the front panel and then switch on the plotter by
pushing the power switch.
Release the
Enter
key when
“
STATUS / Initializing
” appears on the front-panel
screen.
If there is no sound, nor any light on the front panel, you have a power
problem.
2
Switch on
1
Press and hold
Enter
1843a
5
When the word “
English
” appears on the front-panel screen, press the
↑
or
↓
key until your language appears.
Then press
Enter
.
LANGUAGE
English
Enter
↓
↑
0014
Setting Up the Plotter
Setup Task 3: Switch On and (Optional) Change the language From English
If English not OK
or if you want
to change the
language