HP 750c HP DesignJet 700 user guide - Page 88
To Change a Roll
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Working With Media and Cartridge(s) Loading Media Loading Media To Change a Roll 1 Make sure the plotter wheels are locked (the brake lever pressed down) to prevent the plotter from moving. 2 If the old roll is not used up, then to remove the media from the media path: a Raise the media lever to release the media. b Open the roll cover and turn the media stop to wind the media out of the plotter and onto the roll. c Lower the media lever. Raise the lever Wind the roll 1840a 3-10
3-10
Loading Media
To Change a Roll
1
Make sure the plotter wheels are locked (the brake lever pressed down) to prevent
the plotter from moving.
2
If the old roll is not used up
, then to remove the media from the media path:
a
Raise the media lever to release the media.
b
Open the roll cover and turn the media stop to wind the media out of the
plotter and onto the roll.
Raise the lever
Wind the roll
c
Lower the media lever.
1840a
Working With Media and Cartridge(s)
Loading Media