HP 750c HP DesignJet 755CM Printer User's Guide - C3198-60051 - Page 187

MESSAGES 10 Front-Panel Messages Message STATUS Returning cartridges Explanation and Action The cartridge carriage is returning to its station at the left of the printer. STATUS Roll feed edge trim The printer is trimming the edge of roll media. STATUS Initializing The printer is doing an internal check on power-up. STATUS Out of media The printer has received a file, is ready to print, but has no media loaded. STATUS Printing The printer is printing. STATUS Printing (Special) The printer is printing with a special print mode controlled by your software rather than by the printer. STATUS Ready for media The printer is ready for you to load media. STATUS Ready The printer is ready to print. STATUS Receiving The printer has received data. STATUS Testing cartridges The printer is testing the cartridges for problems, i.e., clogged cartridge or bad electrical connection (improper seating). Switch power off Turn off the printer. The cartridge carriage cannot move. The printer may be Check cartridge path jammed with media. Check the media path and clear it if necessary. Then turn on the printer. Switch power off Check paper path Turn off the printer. The drive roller cannot move or the roll feed spindle cannot freely rotate. The printer may be jammed with media. Check the media path and clear it if necessary. Then turn on the printer. System error XXXXXX An internal error has occurred and a system error number is displayed. Press Enter; this may clear the error and allow you to continue. If you cannot continue, turn off the printer, then turn it on again. If you still see the system error message, record the system error number and have the printer serviced. For support details, see page 9-25. Wrong cartridge type You have loaded one or more incompatible cartridges. Replace the cartridges with those appropriate for this printer. 10-5