HP 750c HP DesignJet 755CM Printer User's Guide - C3198-60051 - Page 28
Check the leading edge as it unwinds from the spool. If it is uneven, trim it
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setting Up the Printer Task 3: Load Media 5 Insert the spindle so that the large media stop (A) is to the right and the small endcap (B) to the left. Push in firmly on both ends. Be sure the media remains flush against the media stop. B A A Media path 0017 The relationship of the media to the roller must be as shown in the diagram above. 1837 6 Check the leading edge as it unwinds from the spool. If it is uneven, trim it as explained in step 7. Otherwise go to step 8. 1-10
1-10
5
Insert the spindle so that the large media stop (A) is to the right and the
small endcap (B) to the left. Push in firmly on both ends. Be sure the
media remains flush against the media stop.
A
B
A
Media path
1837
0017
The relationship of the media to the roller must be as shown in the
diagram above.
6
Check the leading edge as it unwinds from the spool. If it is uneven, trim it as
explained in step 7.
Otherwise go to step 8.
Setting Up the Printer
Task 3: Load Media