HP 750c HP DesignJet 755CM Printer User's Guide - C3198-60051 - Page 44

Setting Up the Printer Task 7: (Serial Interface Users Only) Configure the Interface Task 7: Configure the Interface (Serial Interface Users Only) The following table shows the settings available for the printer's serial interface parameters, the factory defaults and the most likely requirements for different computers. Parameter Baud rate Parity1 Serial (RS-232-C) Settings Available settings Likely requirement for ... Macintosh PC Unix 1200 2400 4800 9600 (2) 9600 9600 19200 38400 None (0) (2) None None Even Odd Italics = factory default 1 Parity of None = 8 data bits, 1 stop bit Parity of Even or Odd = 7 data bits, 1 stop bit 2 Consult your software documentation. The settings on the printer must match those of the computer and software sending the data. Use their documentation to find the requirements. If in doubt, try with the above suggestions. If the printer's defaults already match the requirements, then you can skip the rest of this task. 1-26