HP Designjet 10000s HP Designjet 10000 Series - User's Guide - Page 141
In general, it is best to dry the printed side for more than three hours. For images with a dark
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Printing on the back of the media after rewinding CAUTION Use the liner when printing at a high printing rate (or ink on the media is not dry) to prevent the media from adhering to the platen (Refer to How do I print with a liner). After printing on the top side (A), the media is rewound on the roll in the paper feeder (B), the roll is removed from the main scroller and reversed on the scroller (C), and printing on the back of the media is performed (D). The drying time of a printed side varies depending on the image, so you must verify that the printed side is completely dry before printing on the other side. In general, it is best to dry the printed side for more than three hours. For images with a dark intensity a 24 hours is required. How do I perform double-sided printing 1. Install the media on the main scroller of the printer (Refer to Install a media roll in the printer using the main scroller). 2. Select the media feed position. ENWW Printing on the back of the media after rewinding 131