HP Designjet 10000s HP Designjet 10000 Series - User's Guide - Page 76

How do I perform basic media operations? To change the printhead height on the front panel: 1. Press the Online key. 2. Press the key to display the MEDIA REG menu. 3. Scroll to the PH HEIGHT VAL option and press the OK key. 4. Select NORMAL or HIGH, according to the mechanical change you have made, and press the OK key. Parameters: NORMAL (default) or HIGH (for thick media). NOTE When the printhead height is changed, a gap in printing may occur in bidirectional printing. Adjust the correction value for bidirectional printing (Refer to Perform printhead position adjustment). Remove a media roll from the printer To remove a media roll from the printer: 1. Remove the tension bars from the media feed side and take-up side of the printer. 2. If necessary, cut the media. CAUTION A mesh is installed on the media feed side and take-up side of the printer so that the media does not adhere to the platen. Do not remove this netting. When cutting the media, take care not to damage the netting. 66 Chapter 2 How do I perform basic media operations? ENWW