HP Designjet 10000s HP Designjet 10000 Series - User's Guide - Page 221
If full, it should be emptied as follows
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
If full, it should be emptied as follows: 1. Loosen the screw (2) and lift up the lever (1) to release the waste ink bottle. 2. Carefully pull out the waste ink bottle (1) , taking care not to spill ink on the printer or on the floor. How do I maintain the printer? 3. Seal the waste ink bottle with its cap and dispose of the filled bottle properly according to all local, state, and federal regulations. ENWW Replace the waste ink bottle 211
If full, it should be emptied as follows:
1.
Loosen the screw (2) and lift up the lever (1) to release the waste ink bottle.
2.
Carefully pull out the waste ink bottle (1) , taking care not to spill ink on the printer or on the floor.
3.
Seal the waste ink bottle with its cap and dispose of the filled bottle properly according to all local,
state, and federal regulations.
ENWW
Replace the waste ink bottle
211
How do I maintain the printer?