HP Designjet 10000s HP Designjet 10000 Series - User's Guide - Page 142

a. Select MAIN using the or keys. b. Press the OK key to confirm the selection. CAUTION To print on thick tarpaulin (0.5 mm or thicker), raise the printhead height first (Refer to Change the printhead height). NOTE If tarpaulin media designed for single side printing (different surface finishes) is used, print on the rougher side first. 3. Feed the media onto the take-up reel (Refer to Use the take-up reel). 4. With a suitable marker put guide marks (1), on the edges of the back of the media (3), where the edges intersect the platen groove (2). These marks will be useful for aligning top side for positioning the media when printing on the back. How do I perform double-sided printing 5. Print on the top side of the media. 6. Once the printing has completed, remove the tension bars on the feed side and media take-up side. 132 Chapter 4 How do I perform double-sided printing ENWW