HP Designjet 10000s HP Designjet 10000 Series - User's Guide - Page 149
dashed line.
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
3. Feed the media onto the take-up reel (Refer to Use the take-up reel). NOTE Wind the media onto the take-up reel about four full turns because you will need a top margin of approximately 2.5 m to print on the back of the media. 4. Print on the top side of the media. 5. When the printing on the top side completes, two additional lines are printed. The first is a solid line (2) which is used as a guide to align the print position between the top side and the back; the second line is a dashed line (1) to use as a cutting guideline. 6. Once the printing has completed, feed enough media out of the printer and cut the media along the dashed line. 7. With a suitable marker put guide marks (2) on the edges of the back of the media (3), where the edges are intersected by the solid line (1). How do I perform double-sided printing ENWW Printing on the back of the media from the feed side (after relocating from take-up 139 side)