HP Deskjet 6940 User Guide - Macintosh - Page 31

Con Bluetooth settings on a network printer, Open the embedded Web server, Bluetooth, Parameter

Page 31 highlights

(continued) ● Configure Bluetooth settings. ● Visit HP's Web site for support information and to purchase supplies. Caution It is recommended that the printer and the computers that use it be on the same subnet. Printer installation across subnets can be problematic depending on the type of router used. Before using the printer's internal Web page, verify that the printer and the computer are powered on and connected to the network. Open the embedded Web server Follow these steps to open the printer's internal Web page: 1. Launch the Internet browser. Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher. 2. Enter either the printer's IP address or host name in the browser's address box. Note If the printer is on a different subnet than the computer, enter the printer's IP address (for example: http://192.168.1.1) in the browser's address box to open the embedded Web server. Also, if the computer uses a proxy server to access the Internet, you might need to configure the browser to by-pass the proxy server in order to access the EWS. If you do not know the printer IP address or host name, print an HP Report page. Configure Bluetooth settings on a network printer The following table describes the Bluetooth settings you can configure on the Bluetooth tab of the printer's embedded Web server (EWS) if the printer is connected to the network with an Ethernet cable: Note If your printer is not connected to a network, connect a USB cable from your computer to the rear USB port on the printer and open the HP Printer Utility to configure the Bluetooth settings. Parameter Device Address Device Name Passkey Description The hardware address of the Bluetooth device. Note You cannot change this address. The device name assigned to the printer so that other Bluetooth devices can identify it. A 4-digit value that the user must enter in order to print using Bluetooth. The default passkey is 0000. User's guide 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

Configure
Bluetooth settings
.
Visit HP's Web site for support
information and to purchase supplies.
Caution
It is recommended that the printer and the computers that use it be on
the same
subnet
. Printer installation across subnets can be problematic
depending on the type of router used.
Before using the printer's internal Web page, verify that the printer and the computer are
powered on and connected to the network.
Open the embedded Web server
Follow these steps to open the printer's internal Web page:
1.
Launch the Internet browser.
Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher.
2.
Enter either the printer's
IP address
or
host name
in the browser's address box.
Note
If the printer is on a different
subnet
than the computer, enter the
printer's IP address (for example: http://192.168.1.1) in the browser's
address box to open the embedded Web server. Also, if the computer uses
a proxy server to access the Internet, you might need to configure the
browser to by-pass the proxy server in order to access the EWS.
If you do not know the printer IP address or host name,
print an HP Report page
.
Configure Bluetooth settings on a network printer
The following table describes the Bluetooth settings you can configure on the
Bluetooth
tab of the printer's
embedded Web server (EWS)
if the printer is connected
to the network with an Ethernet cable:
Note
If your printer is not connected to a network, connect a USB cable from
your computer to the rear USB port on the printer and open the
HP Printer
Utility
to configure the Bluetooth settings.
Parameter
Description
Device Address
The hardware address of the Bluetooth device.
Note
You cannot change this address.
Device Name
The device name assigned to the printer so that other
Bluetooth devices can identify it.
Passkey
A 4-digit value that the user must enter in order to print using
Bluetooth. The default passkey is 0000.
(continued)
User's guide
29