HP Integrity rx2620 Installation Guide, Third Edition - HP Integrity rx2620 (A - Page 15
Introduction - servers support
View all HP Integrity rx2620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1 Introduction The HP Integrity rx2620 server is a 2-socket server based on the Itanium processor architecture. The server supports the following operating systems: Microsoft Windows, HP-UX, Linux, and OpenVMS. The server is available in either rack-mount or tower configurations. The server accommodates up to 12 DIMMs and internal peripherals, including disks and a DVD-ROM. Its high availability features include hot-swap power supplies and hot-plug disk drives. This chapter addresses the following topics: • "Server Overview" on page 16 • "Server Components" on page 17 • "System Board Components" on page 20 • "Firmware" on page 26 • "Safety Information" on page 27 • "Installation Sequence and Checklist" on page 28 Chapter 1 15
Chapter 1
15
1
Introduction
The HP Integrity rx2620 server is a 2-socket server based on the Itanium processor architecture. The server
supports the following operating systems: Microsoft Windows, HP-UX, Linux, and OpenVMS. The server is
available in either rack-mount or tower configurations. The server accommodates up to 12 DIMMs and
internal peripherals, including disks and a DVD-ROM. Its high availability features include hot-swap power
supplies and hot-plug disk drives.
This chapter addresses the following topics:
•
“Server Overview” on page 16
•
“Server Components” on page 17
•
“System Board Components” on page 20
•
“Firmware” on page 26
•
“Safety Information” on page 27
•
“Installation Sequence and Checklist” on page 28