HP Integrity rx2620 Installation Guide, Third Edition - HP Integrity rx2620 (A - Page 38

Lock/Unlock Lever, Filler Removal from Slot, Step 1.

Get HP Integrity rx2620 PDF manuals and user guides View all HP Integrity rx2620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Installing Additional Components Installing Internal Hard Disk Drives To install a hard disk drive when the drive bay is locked, perform the following steps: Step 1. Remove the top metal cover. See "Removing the Top Metal Cover" on page 35. Step 2. Locate the Lock/Unlock lever located between the drive bay and the side of the server at the front left side of the server. See Figure 3-6 for the lever location. Figure 3-6 Lock/Unlock Lever Front of server Step 3. Press down on the Unlock lever to disengage the drive lock. Step 4. Remove the slot filler by pulling it out of the server. Figure 3-7 shows how to remove the slot filler. Figure 3-7 Filler Removal from Slot Front of server 38 Chapter 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
Chapter 3
Installing Additional Components
Installing Internal Hard Disk Drives
38
To install a hard disk drive when the drive bay is locked, perform the following steps:
Step 1.
Remove the top metal cover. See “Removing the Top Metal Cover” on page 35.
Step 2.
Locate the Lock/Unlock lever located between the drive bay and the side of the server at the front
left side of the server. See Figure 3-6 for the lever location.
Figure 3-6 Lock/Unlock Lever
Step 3.
Press down on the
Unlock
lever to disengage the drive lock.
Step 4.
Remove the slot filler by pulling it out of the server. Figure 3-7 shows how to remove the slot filler.
Figure 3-7 Filler Removal from Slot
Front of server
Front of server