IBM 4332-004 User Guide - Page 109

Paper Menu Item TRAY SWITCH ON* OFF Value Description Specifies whether or not to switch to another paper tray if the current one is empty or runs out of paper. (Tray switching always occurs when the requested tray contains the wrong size paper.) v ON-specifies that if the current tray is empty, the printer will automatically look in other trays for the right size of paper. The search sequence is the default tray, followed by the other trays in order of capacity. The normal search order would be: - The tray specified by the job or the printer default tray if the job does not specify a tray. - Tray 5 (if installed) - Tray 4 (if installed) - Tray 3 (if installed) - Tray 2 - Tray 1 - The auxiliary tray if duplexing is off. If the DUPLEX item in the Paper menu is ON, the printer excludes the auxiliary tray from the tray switching sequence. v OFF-specifies no switching when a tray is empty. Notes: v You can exclude trays from the tray switching search sequence that occurs when a tray is empty. See the description for the following items in the Paper Menu: AUXTRAYPROT (page 100), TRAYn PROT (page 99), or ENVTRAYPROT (page 101). v Tray switching does not occur when two trays have the same size paper but different orientations. For example, if Tray 1 and Tray 3 both have letter-size paper, but Tray 1 is short-edge feed and Tray 3 is long-edge feed, tray switching will not occur. v Tray switching is automatic when the printer detects the wrong size paper in the requested tray. You cannot turn this type of switching off; nor can you "protect" trays from being included in this switching sequence. continued on next page... Chapter 6. Operator Panel Menus 97