IBM 4332-004 User Guide - Page 123

PS Menu Item PAGEPROT Value AUTO* ON COPIES PRINT ERRS nnn OFF* ON EDGE-EDGE ON* OFF Description Sets page protection: v AUTO-the printer protects the minimum amount of memory necessary. v ON-the printer reserves enough memory to process an entire page without compression before it prints the page. This can help in the rare case where the printer compression scheme causes a loss of quality in complex graphics. This setting is available only when the printer has enough memory. See "Memory Requirements" on page 8 for more information. Specifies how many copies of each job to print. nnn can be from 1 to 999. 1 is the default. Specifies how the printer handles PostScript errors: v OFF-the printer cancels the job, but does not print an error page. v ON-the printer prints an error page and cancels the job. Turns edge-to-edge printing on or off. v ON-The printer allows printing up to the physical page size. v OFF-the printer maintains a border of 4 mm on all four paper sides. Notes: 1. IBM recommends leaving EDGE-EDGE set to ON when you use IBM printer drivers. If you use non-IBM printer drivers, you may need to set EDGE-EDGE to off to prevent toner contamination in the printer. 2. The IBM printer driver cannot override the OFF setting. If you set EDGE-EDGE to OFF, you cannot print edge-to-edge. IPDS Menu The following table describes the settings you can change from the IPDS Menu. An asterisk (*) next to a value in the table indicates the factory default. The IPDS Menu appears only if you have the IPDS SIMM installed. Notes: 1. To select a new value, press the Enter key when the value is displayed in the message display area. An asterisk (*) appears next to the value in the message display area, indicating that it is now active. 2. Values specified in IPDS print jobs override IPDS Menu values set at the printer. Chapter 6. Operator Panel Menus 111