IBM 4332-004 User Guide - Page 118

Parallel Menu Item Value PERSONALTY AUTO* PCL PS BI-DI ON* OFF PORT TMEOUT nnn Description Specifies how the printer treats jobs it receives over the parallel attachment. v AUTO-the printer determines if the data stream is PCL5e or PostScript and handles it accordingly. This is the recommended value. v PCL-the printer treats all data streams as PCL5e. v PS-the printer treats all data streams as PostScript. Turns bi-directional communications over the parallel attachment on or off. v OFF-the printer receives messages from the host, but does not send messages back. v ON-the printer receives and sends messages to the host. Specifies how many seconds the printer waits for data before it determines there is no more data to receive for the job. The printer then checks other attachments for jobs, if other attachments are installed. The valid range is 5 to 300 seconds. The default value is 15 seconds. PCL Menu Use the PCL Menu to define the way the printer handles PCL5e jobs. The following table describes the settings you can change from the PCL Menu. An asterisk (*) next to a value in the table indicates the factory default. Notes: 1. To select a new value, press the Enter key when the value is displayed in the message display area. An asterisk (*) appears next to the value in the message display area, indicating that it is now active. 2. Values set in PCL5e print jobs (either by the print application or the printer driver) override PCL Menu values you set at the printer. 3. If you are unfamiliar with using the operator panel to work with menus, please read "Using the Operator Panel Keys" on page 23 and "Navigating Menus" on page 24 before continuing. 106 Infoprint 32 and Infoprint 40: User's Guide