IBM 4332-004 User Guide - Page 177

Chapter 8. Installing Printer Options This chapter describes how to install and remove the following options: v The SIMM and hard drive (see page 166) v Network interface cards (see page 172) v The Face-Up Output Bin (see page 175) v The 2500-Sheet Input Unit (see page 181) v The Envelope Feeder (see page 188) v The 2000-Sheet Finisher (see page 191) v The Duplex Unit (see page 206) Important! To verify that an option is installed correctly, print the configuration page. See "Printing the Printer Configuration Page" on page 25. Also, make sure you update your printer driver to indicate the new feature is installed. Handling Static Sensitive Devices When you handle options and other computer components, take these precautions: v Limit your movement. Movement can cause static electricity to build up around you. v Always handle components carefully. Handle adapters and memory-module kits by the edges. Never touch any exposed circuitry. v When you are installing a new option, touch the static-protective package containing the option to the mounting bracket on the controller card for at least two seconds. This reduces static electricity from the package and from your body. v When possible, remove the option and install it directly in the controller without setting the option down. When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it. v Do not place the option on the printer cover or other metal surface. © Copyright IBM Corp. 1998, 1999 165