IBM 4332-004 User Guide - Page 81

a. Press the Menu key until you see IPDS MENU in the display. b. Press the Item key until you see CUSTOM FORM=n* in the display. c. Press the Value key until you see CUSTOM FORM=1* in the display. d. Press the Enter key to select the new setting. An asterisk appears next to the value, showing that it is active. 7. To restore the printer to READY status, press the Online key. Note: Custom forms can be printed only from the auxiliary tray or the envelope feeder. For the auxiliary tray, set the AUXSIZE item in the Paper Menu to UNIV. See "Loading Universal Paper into the Auxiliary Tray" on page 49 for more information. For the envelope feeder, set the ENVSIZE item in the Paper Menu to UNI-ENV. See "Loading Universal Envelopes into the Envelope Feeder" on page 62 for more information. Stapling Situation: You want to staple print jobs using the 2000-Sheet Finisher. Action: 1. Make sure the 2000-Sheet Finisher is installed. 2. Select one of the 2000-Sheet Finisher bins as the output destination. You can set the output destination at the operator panel (update the OUTPUT item on the Paper Menu), or from within the print job (for example, using the printer driver). Values set within the print job (by the printer driver or a print application) override values set at the operator panel. 3. Review Figure 1 on page 70 to determine which staple option to select. Staple position is determined by three factors: v The number of staples you want v The paper orientation you select (portrait or landscape) v The paper feed orientation (short-edge or long-edge) Chapter 4. Paper Handling 69