IBM 4332-004 User Guide - Page 32

4. Attach the other end of the cable into the parallel interface slot on your PC or workstation. Note: If there is a ground strap on your cable, attach it to the attachment screw provided. 5. Plug the printer power cord into the wall and switch the printer on. Installing Printer Drivers Before you can print from your PC or workstation to your printer, you need to install the correct printer driver on your system. The printer includes a CD-ROM which contains PCL5e and PostScript printer drivers for numerous systems. (See the CD-ROM for a complete list.) To use the setup wizard provided on the CD-ROM, choose Set up printer or Browse products, click Start wizard, and follow the instructions. Notes: 1. For your printer driver to work effectively, you must indicate to your printer driver what features are installed on your printer, for example, what trays are installed, and how much memory is installed. Therefore, after you install a driver, make sure you update it to indicate the features installed on your printer. Also, if you install (or remove) a feature at a later date, make sure you update your printer driver. 2. Each operating system has unique driver installation procedures. For specific installation instructions, see the driver installation procedure and README documentation for your operating system. 3. Your printer may include additional drivers not included in this list. 4. Printer drivers are also available as follows: a. Access the IBM Printing Systems Home Page at: http://www.printers.ibm.com b. Go to the printer driver you need and follow the download instructions. 20 Infoprint 32 and Infoprint 40: User's Guide