IBM 4332-004 User Guide - Page 180

hc3u255F group in the socket closest to the center of the controller card. DRAM SIMMs Flash memory, DBCS SIMMs or IPDS SIMMs 45° 5. Hold the SIMM with the notched edge toward the socket and the notch toward the network card slots. Insert the SIMM at a 45 degree angle and move it into position in the socket. Using your thumbs, press with even pressure on both ends of the SIMM until the SIMM is firmly seated in the socket. Make sure the clips on either end of the socket snap into place to hold the SIMM. If necessary, use your thumbs to move the clips upright into the grooves to lock the SIMM in place. 6. Verify that the SIMM is correctly installed in the socket by looking at its position from the sides of the controller card. 7. Reinstall the controller card. See "Reinstalling the Controller Card" on page 170. Installing a Hard Drive Important! Follow the instructions for handling static-sensitive devices described on page 165. Installing a hard drive in your printer will allow you to print jobs with multiple collated copies. Use the following procedure to install a hard drive: 1. Switch off the printer. 168 Infoprint 32 and Infoprint 40: User's Guide