IBM 4332-004 User Guide - Page 42

Action: 1. Press the Online key to take the printer offline. 2. Press the Menu key. TEST MENU appears in the display area. 3. Press the Item key until you see PRINT PS FONTS. 4. Press the Enter key to print the PostScript fonts list. 5. After the page prints, press the Online key to restore the printer to READY status. Printing a List of IPDS Resident Fonts Situation: You have the optional IPDS SIMM installed on your printer and you want to see a list of the IPDS resident fonts. Action: 1. Press the Online key to take the printer offline. 2. Press the Menu key. TEST MENU appears in the display area. 3. Press the Item key until you see PRINT IPDS FONTS. (This item appears only if you have the IPDS SIMM installed on your printer.) 4. Press the Enter key to print the IPDS resident fonts list. 5. After the page prints, press the Online key to restore the printer to READY status. Adjusting Print Density Situation: You want to increase or decrease the print density, making the print darker or lighter. Action: 1. Press the Online key until you see OFFLINE in the display. 2. Press the Menu key until you see CONFIG MENU in the display. 3. Press the Item key until you see DENSITY=n* in the display, where n is the density value currently selected. 4. Press the Value key until you see the value you want to assign to the toner density. 6 is the most dense, 0 is the least dense, and 3 is the default. 5. Press the Enter key to select the new density. An asterisk (*) appears next to the value, showing that it is active. 6. To restore the printer to READY status, press the Online key. the density value that is currently selected Notes: 1. Increasing density may make documents appear darker; however, it also uses more toner, which decreases the number of images you can expect to print with your toner cartridge. 30 Infoprint 32 and Infoprint 40: User's Guide