IBM 4332-004 User Guide - Page 143

Coaxial SCS Menu Item Value PA1 none PA2 none Description Selecting this value and pressing the Enter key sends a PA1 signal to the host. Note: This applies to SCS only; not DSC/DSE or IPDS. Selecting this value and pressing the Enter key sends a PA2 signal to the host. Note: This applies to SCS only; not DSC/DSE or IPDS. Twinax SCS Menu Use the Twinax SCS Menu to define how the printer handles SCS data over the twinax attachment. The following table describes the settings you can change from the Twinax SCS Menu. An asterisk (*) next to a value in the table indicates the factory default. The Twinax SCS Menu appears only if you have the twinax network interface card installed. Notes: 1. To select a new value, press the Enter key when the value is displayed in the message display area. An asterisk (*) appears next to the value in the message display area, indicating that it is now active. 2. Values set in print jobs (either by the print application or the printer driver) override Twinax SCS Menu values set at the printer. 3. For more information about configuring the twinax attachment, see Twinax/Coax Configuration Guide. 4. If you are unfamiliar with using the operator panel to work with menus, please read "Using the Operator Panel Keys" on page 23 and "Navigating Menus" on page 24 before continuing. Chapter 6. Operator Panel Menus 131