IBM 4332-004 User Guide - Page 274
Action, Online, CX SEND STATE, Meaning, Continue, Enter, NETWORK OPT / RESEAT OPTION, NETWORK OPT /
![]() |
UPC - 087944489719
View all IBM 4332-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Setup Menu, or (b) the printer has been in an intervention required state (such as, out of paper) for longer that the IRQ TMEOUT setting. Action: Solve the problem that caused the message (for example, press the Online key to put the printer online, or add paper). To disable this error message, set the HLD TMEOUT and IRQ TMEOUT values in the Coax Setup Menu to 0. 862 CX SEND STATE Meaning: Your coax host has placed your printer in "Send State" and is waiting for the printer to return a PA signal. Action: Press the Continue key to clear the message. (You may need to press the key more than once.) Then do the following to send the PA signal. 1. Press the Online key to take the printer offline. 2. Press the Menu key until you see the Coaxial SCS Menu. 3. Press the Item key until you see PA1 or PA2 (whichever signal you want to send). 4. Press the Enter key to send the signal. 5. Press the Online key to resume printing. 871 NETWORK OPT / RESEAT OPTION Meaning: The printer detected a network interface card in the right slot, but the card is not communicating. Action: Make sure the network interface card is properly installed and restart the printer. See "Installing a Network Interface Card" on page 172. If the message recurs, call for service. Remove the network interface card from the printer if you want to print a printer configuration page or if you want to print from the parallel port. 872 NETWORK OPT / RESEAT OPTION Meaning: The printer detected a network interface card in the left slot, but the card is not communicating. Action: Make sure the network interface card is properly installed and restart the printer. See "Installing a Network Interface Card" on page 172. If the message recurs, call for service. Remove the network interface card from the printer if you want to print a printer configuration page or if you want to print from the parallel port. 876 NETWORK OPT / CHECK CONFIG Meaning: The printer has detected that two of the same network interface cards have been installed. Action: Remove one of the cards. 262 Infoprint 32 and Infoprint 40: User's Guide
![](/manual_guide/products/ibm-4332004-user-guide-11e2267/274.png)