IBM 4332-004 User Guide - Page 130

IPDS Menu Item OUTPUT Value MAIN* FACE-UP FINISHR1 FINISHR2 FINISHR3 ANY-FIN CUSTOM FORM GCS 1* 2 3 4 5 AUTO* CHAR_SCALE FONT_ACT BAR CODE AUTO* 4028 4032 Description Selects the default output bin to use. Only installed trays appear in the list. v MAIN is the main face-down output bin. v FACE-UP is the Face-Up Output Bin. v FINSHR1 is the upper bin of the 2000-Sheet Finisher. v FINISHR2 is the middle bin of the 2000-Sheet Finisher. v FINISHR3 is the lower bin of the 2000-Sheet Finisher. v ANY-FIN specifies automatic bin switching. Notes: 1. If the 2000-Sheet Finisher is installed, FINISHR1 is the default bin. 2. If you change OUTPUT to another bin, power off and then power on the printer for the new value to take effect. Specifies the custom form to use. The Custom Forms Menu lets you specify up to five custom forms. See "Defining Custom Form Sizes for IPDS" on page 68 for information on defining custom forms. Sets Graphic Character String (GCS) processing: v AUTO-specifies that the printer use the value specified by the IPDS Menu EMULATION item (4332 or 4028). v CHAR_SCALE-specifies 4028 IPDS EMULATION. CHAR_SCALE prints graphics text characters by scaling the characters in a currently activated font. Character Cell Size is defined in the GOCA data stream. Not available for DBCS. v FONT_ACT-specifies 4332 IPDS EMULATION. FONT_ACT prints graphics text characters from a currently activated font at the font's activation size, without scaling. GOCA data stream Character Cell Size information is ignored. Specifies the barcode level protocol: v AUTO-specifies that the printer use the value specified by the IPDS Menu EMULATION item (4332 or 4028). v 4028-specifies 4028 IPDS EMULATION. v 4332-specifies 4332 IPDS EMULATION. 118 Infoprint 32 and Infoprint 40: User's Guide