IBM 4332-004 User Guide - Page 252
Switching To Ps, Meaning, Action, Tray Lifting, Twinax Hex Prt, Updating Flash/do Not Power Off,
UPC - 087944489719
View all IBM 4332-004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
SWITCHING TO PS Meaning: The printer is switching to PostScript. Action: None required. TRAY LIFTING Meaning: A paper tray is on the rise. Action: None required. TWINAX HEX PRT Meaning: You are printing a hexadecimal dump for troubleshooting problems with non-IPDS jobs sent over the twinax attachment. Action: To cancel the dump, select CANCEL TX PRT from the Test Menu. UPDATING FLASH/DO NOT POWER OFF Meaning: You sent a microcode update to the printer, which is currently processing. Action: None required. Note: Do not power off the printer while this message displays. Powering off could damage the printer. WAIT FOR IDLE PRINTER Meaning: You attempted to print from the Test Menu while the printer was processing PCL, PostScript, or IPDS data. Action: When a port timeout occurs for the data stream (PCL5e, PostScript, or IPDS), the READY message appears on the operator panel. Wait for the READY message and then try printing again. WARMING UP Meaning: The printer is warming up. When it is warm, it displays the READY message. Action: None required. If the message seems to appear too frequently, change the value for the power-saving mode to a larger value. See "Changing the Power Savings (Sleep Mode) Interval" on page 31 for instructions on how to change the setting. If the message displays for several minutes, the printer controller connection may be bad. In this case, call for service. Error Messages The following error messages require operator intervention; they are listed numerically. 240 Infoprint 32 and Infoprint 40: User's Guide