IBM 4332-004 User Guide - Page 61

Loading Universal Paper into the Auxiliary Tray Note Many applications allow you to specify the input tray you want to use. This value will override any value set at the printer. If your application does not let you pick an input tray, use the Paper Menu to select the tray. To select the auxiliary tray, set SOURCE to AUXTRAY (see "Selecting the Default Input Tray" on page 64). You can use the auxiliary tray to print any paper size that falls within the following range: Minimum: 3.92 x 5.75 in 100 x 148 mm Maximum: 11.6 x 17 in 297.4 x 431.8 mm To print a custom form size, do the following: 1. Set the AUXSIZE item in the Paper Menu to UNIV. 2. Make sure your print application knows what size paper it is printing to. The printer does not reflow data to fit the paper you load in the auxiliary tray. v For the top and left margins, use whatever value you would normally use. No special calculations are required. v To determine the minimum bottom margin, subtract the length of the universal size paper from 431.8 mm or 17 in. For example, if your custom form is 300 mm long, subtract the custom form length from 431.8 mm (431.8 mm − 300 mm = 131.8 mm). Your application would then apply at least a 131.8 mm bottom margin. v To determine minimum right margin for a universal size paper: subtract the width of the universal size paper from 297.4 mm or 11.6 in. For example, if your paper is 210 mm wide, subtract the paper width from 297.4 mm (297.4 mm − 210 mm= 87.4 mm). Your application would then apply at least a 87 mm right margin. 3. If you are printing from an IPDS application: a. Use the Custom Forms Menu to define the custom form size. You can define up to five custom form sizes. Chapter 4. Paper Handling 49