IBM 4332-004 User Guide - Page 133

IPDS Menu Item FONT CAPTURE ON* OFF Value Token Ring Menu Description Sets FONT CAPTURE processing: v ON-allows the printer to save downloaded font resources onto the hard disk for use beyond power cycles. The IPDS host must provide the Activate Resource command with proper resource identifiers prior to downloading the font resource to be captured. v OFF-the printer will not save downloaded font resources after a power cycle. Important! For information about configuring the token-ring attachment, please see Ethernet and Token Ring Quick Configuration Guide, which comes with the token-ring network interface card. "Chapter 9. Configuring Printer Network Addresses" on page 211 describes how to define the IP address, default gateway address, and subnet mask from the operator panel. Use the Token Ring Menu to configure the token-ring attachment. The following table describes the settings you can change from the Token Ring Menu. An asterisk (*) next to a value in the table indicates the factory default. The Token Ring Menu appears only if you have the token-ring attachment installed. Notes: 1. To select a new value, press the Enter key when the value is displayed in the message display area. An asterisk (*) appears next to the value in the message display area, indicating that is now active. 2. If you are unfamiliar with using the operator panel to work with menus, please read "Using the Operator Panel Keys" on page 23 and "Navigating Menus" on page 24 before continuing. Chapter 6. Operator Panel Menus 121