IBM 4332-004 User Guide - Page 49

5. You may print universal paper sizes, but some small sizes may jam or register improperly. 6. The printer cannot distinguish between B4 and legal size paper or B5 and executive size paper. A4 paper group machines will display B4 and B5 paper sizes, but allow you to feed legal or executive if you load the paper and press the Continue key. Letter paper group machines will display legal and executive paper sizes but allow you to feed B4 or B5 paper sizes if you load the paper and press the Continue key. 7. Offset restrictions: v Offsetting is not supported in the Face-Up Output Bin. v Only the following media sizes can be offset: Letter, Legal, Folio, Ledger, A4, and A3. 8. 2000-Sheet Finisher restrictions: v You must load the following paper sizes long-edge (LEF) first, not short-edge (SEF): A5, Executive, and Statement. v The 2000-Sheet Finisher cannot process envelopes, Japanese Official Postcard (Hagaki), universal envelope sizes, or universal paper sizes. v The 2000-Sheet Finisher can finish jobs requiring one paper size within a job. Do not submit a job to the 2000-Sheet Finisher that requires mixed paper sizes. v Several conditions can cause the 2000-Sheet Finisher bins to fill at a reduced capacity, including: - Paper sizes larger than A4 - Stapled output - Powering on the printer while there is output in the bins. If a problem occurs, empty the output bins, power off the printer, and then power on the printer. v When stapling, you can stack approximately 48mm or 600 sheets, in up to 100 stapled sets. (Results vary somewhat depending on paper characteristics such as thickness and weight.) For example, you can staple up to 12 sets of 50 sheets or 30 sets of 20 sheets, but you cannot staple more than 100 sets even if the total page count would be less than 600. Media Weight and Thickness Specifications The following media weights and thicknesses are supported: v All standard paper trays: 17-24 pound paper (64 to 90 grams/meter²) for single-sided (simplex) printing v All standard paper trays: 17-24 pound paper (64 to 90 grams/meter²) for two-sided (duplex) printing v Envelope Feeder: should not exceed 24 pound (90 grams/meter²) bond Chapter 4. Paper Handling 37