IBM JS20 Hardware Maintenance Manual - Page 104
Firmware, checkpoint, progress, codes
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
5. Try reseating a suspected component or reconnecting a cable before replacing the component. 6. If the actions listed for a specific symptom do not resolve the problem, see "General checkout" on page 37 and "Undetermined problems" on page 156. POST error codes and messages are displayed on the screen. Note: Adapters and devices are not supported by the diagnostic programs. In these cases, see "Undetermined problems" on page 156. Firmware checkpoint (progress) codes In the following error codes, X can be any number or letter. Notes: 1. For checkpoints with no associated location code, see "Light path diagnostics" on page 46 to identify the failing component. 2. For checkpoints with location codes, see "Physical location codes" on page 154. 3. For problems persisting after FRU replacement, see "Checkout procedure" on page 38 and "Undetermined problems" on page 156. 4. For four-digit codes not listed here, see "General checkout" on page 37. Checkpoint FRU/action D001 (PCI probe process complete; 1. Go to "Checkout procedure" on page 38. create PCI interrupt routing properties) 2. System board and chassis. D002 (PCI adapter NVRAM hint created; system is rebooting) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D003 (PCI probing complete) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D004 (starting install-console; loading GUI package) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D008 (initialize the console and flush 1. Go to "Checkout procedure" on page 38. queues) 2. System board and chassis. D00D (evaluating NVRAM script) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D010 (first pass of open firmware initialization complete; establish parameters for restart) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D011 (first pass of open firmware initialization complete; control returned to initialization firmware) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D012 (second pass of open firmware 1. Go to "Checkout procedure" on page 38. initialization complete; control returned to initialization firmware) 2. System board and chassis. D099 (starting system information validation utility) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. D100 (system serial number was found to be blank) 1. Enter valid serial number. 2. If prompt continues, system board and chassis. 94 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide