IBM JS20 Hardware Maintenance Manual - Page 39
Performing, online, concurrent, diagnostics, system, verification
![]() |
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
IDENTIFIER: DATE Date/Time: Fri Jul 16 04:06:09 Sequence Number: 287 Event type: SRN Callout Resource Name: sysplanar0 Resource Description: System Planar Location: 00-00 Diag Session: Test Mode: 12736 No Console,Non-Advanced,Normal IPL,ELA,Option Checkout Error Log Sequence Number: 3 Error Log Identifier: BFE4C025 SRN: 2B276422 Description: Refer to the Error Code to FRU Index in the system service guide. Probable FRUs: n/a FRU: 09P0406 P1-C1 [BOTTOM] Use Enter to continue. Esc+3=Cancel Esc+0=Exit Enter 6. If any SRNs are displayed, record all information provided from the diagnostic results; then, go to"SRN tables" on page 110 or "Firmware error codes" on page 102. If ″No trouble found″ is displayed, continue to next step. 7. When results are complete, press F3 to return to the Diagnostic Operating Instructions display. 8. Press Ctrl+D to log off from root user or CE login. 9. When finished, contact your hardware service provider with any information you received during the diagnostics, including service request numbers (SRNs) or firmware error codes. Performing AIX online concurrent mode diagnostics for system verification Note: This procedure is for verifying newly-installed components, such as hard disk drives, options, etc. Perform the following steps to run online diagnostics in concurrent mode: 1. Log in to the AIX operating system as root user, or use CE login. If you need help, contact the system operator. 2. Enter the diag command to load the diagnostic controller, and display the online diagnostic menus. 3. At the Function Selection menu, select Diagnostic Routines. 4. At the Diagnostic Mode Selection menu, select System Verification. 5. When the Diagnostic Selection menu is displayed, choose the resource to be tested or all resources to be tested. 6. After selecting the resource, select Commit (PF7 or F7). The resources will then be tested. Chapter 5. AIX online, standalone and verification procedures 29
![](/manual_guide/products/ibm-js20-hardware-maintenance-manual-7a4946f/39.png)