IBM JS20 Hardware Maintenance Manual - Page 141

Service request number A11-50x A11-510 A11-540 A11-550 A12-00x A12-01x A12-02x A12-03x SRN source Description FRU/action G Recoverable errors on resource indicate 1. If repair is not immediately available, reboot a trend toward an unrecoverable error. and the resource will be deconfigured; However, the resource could not be operations can continue in a degraded mode. deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. 2. Check the BladeCenter management module event log for an entry around this time. If no entry is found, replace the system board. G Resource has been deconfigured and is 1. Schedule maintenance; the system is no longer in use due to a trend toward an operating in a degraded mode. unrecoverable error. 2. Check the BladeCenter management module event log for an entry around this time. If no entry is found, replace the system board. G Recoverable errors on resource indicate 1. If repair is not immediately available, reboot a trend toward an unrecoverable error. and the resource will be deconfigured; However, the resource could not be operations can continue in a degraded mode. deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. 2. Check the BladeCenter management module event log for an entry around this time. If no entry is found, replace the system board. G Recoverable errors on resource indicate 1. If repair is not immediately available, reboot a trend toward an unrecoverable error. and the resource will be deconfigured; However, the resource could not be operations can continue in a degraded mode. deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. 2. Check the BladeCenter management module event log for an entry around this time. If no entry is found, replace the system board. G A non-critical error has been detected. 1. Check the BladeCenter management module Error log analysis indicates an error event log; if an error was recorded by the detected by the memory controller, but system or if a checkpoint code is displayed on the failure could not be isolated. the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G A non-critical error has been detected, an 1. Check the BladeCenter management module uncorrectable memory error. event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G A non-critical error has been detected, an 1. Check the BladeCenter management module ECC correctable error. event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G A non-critical error has been detected, a 1. Check the BladeCenter management module correctable error threshold exceeded. event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. Chapter 10. Symptom-to-FRU index 131