IBM JS20 Hardware Maintenance Manual - Page 134
IBM JS20 - BladeCenter - 8842 Manual
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Service request number A03-00x A03-00x A03-01x A03-05x A03-07x A03-09x A03-11x A03-12x SRN source Description FRU/action G Error log analysis indicates an error 1. Check the BladeCenter management module detected by the I/O device, but the failure event log; if an error was recorded by the could not be isolated. system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G Error log analysis indicates an error 1. Check the BladeCenter management module detected by the I/O device, but the failure event log; if an error was recorded by the could not be isolated. system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G I/O Bus Address parity error. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G I/O Error on non-PCI bus. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G System bus address parity error. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G System bus data parity error. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G System bus time-out error. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G Error on System bus. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. 124 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide