IBM JS20 Hardware Maintenance Manual - Page 136
IBM JS20 - BladeCenter - 8842 Manual
![]() |
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Service request number A05-04x A05-05x A05-06x A05-07x A05-08x SRN source Description FRU/action G System shutdown due to voltage outside 1. Check the BladeCenter management module normal range. event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G Sensor indicates an abnormally high internal temperature. 1. Verify that: a. The room ambient temperature is within the system operating environment. b. There is unrestricted air flow around the system. c. All system covers are closed. d. There are no fan failures 2. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 3. If no entry is found, replace the system board. G System shutdown due to abnormally high 1. Verify that: internal temperature. a. The room ambient temperature is within the system operating environment. b. There is unrestricted air flow around the system. c. All system covers are closed. d. There are no fan failures 2. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 3. If no entry is found, replace the system board. G Sensor indicates a power supply has failed. 1. Check the BladeCenter management module event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. G System shutdown due to power supply 1. Check the BladeCenter management module failure. event log; if an error was recorded by the system or if a checkpoint code is displayed on the console, see Chapter 10, "Symptom-to-FRU index," on page 93. 2. If no entry is found, replace the system board. 126 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-js20-hardware-maintenance-manual-7a4946f/136.png)