IBM JS20 Hardware Maintenance Manual - Page 17
BladeCenter, specifications, NEBS/ETSI, environments
![]() |
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BladeCenter JS20 specifications for NEBS/ETSI environments The following table provides a summary of the features and specifications of the BladeCenter JS20 Type 8842 in a NEBS/ETSI environment. This includes model-specific information. Microprocessor: v Two IBM Power PC® microprocessors with 512 KB ECC L2 cache Memory: v Four DDR PC2700 sockets v Minimum: 1 GB v Maximum: 4 or 8 GB (depends on the blade server model) IDE devices: v NEBS application does not support internal drives Size: v Height: 24.5 cm (9.7 inches) v Depth: 44.6 cm (17.6 inches) v Width: 2.9 cm (1.14 inches) v Maximum weight: 5.4 kg (12 lb) Integrated functions: v One dual-port Gigabit Ethernet controller v Light path diagnostics v Local service processor v One IDE hard disk drive controller with two channels v RS-485 interface for communication with BladeCenter management module v Serial over LAN Predictive Failure Analysis (PFA) alerts: v Microprocessors v Memory Environment (NEBS): v Air temperature: - Blade server on: 5° to 40°C (41° to 104°F). Altitude: -60 to 1800 m (-197 to 6000 ft) - Blade server on (short term): -5° to 55°C (23° to 131°F) Altitude: -60 to 1800 m (-197 to 6000 ft) - Blade server on: 5° to 30°C (41° to 86°F). Altitude: 1800 to 4000 m (6000 to 13 000 ft) - Blade server on (short term): -5° to 45°C (23° to 113°F). Altitude: 1800 to 4000 m (6000 to 13 000 ft) - Blade server off: -40° to 70°C (-40° to 158°F) v Humidity: - Blade server on: 5% to 80% - Blade server on (short term): 5% to 90% but not to exceed 0.024 kg water/kg of dry air - Blade server off: uncontrolled Note: "Short term" refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any year, but no more than 15 occurrences during that 1-year period.) Electrical input: v Input voltage: 12 V dc * For information about DIMM type and supported DIMM size, see "Installing memory modules" on page 77. Notes: 1. The operating system in the blade server must provide USB support for the blade server to recognize and use the CD drive and an external diskette drive. The BladeCenter T unit uses USB for internal communication with these devices. Chapter 1. Introduction 7
![](/manual_guide/products/ibm-js20-hardware-maintenance-manual-7a4946f/17.png)