IBM JS20 Hardware Maintenance Manual - Page 42
system-detectable
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
resource associated with that repair action. If the resource associated with your action does not appear on the resource list, select ″sysplanar0″ and press Enter. b. After you have made your selections, choose F7 Commit. Did another Resource Repair Action display appear? If RA Complete appears, press Enter for the NTF screen. No If the "No trouble found" display appears, go to Step 8. Yes Go to Step 7. 7. The parent or child of the resource you just replaced may also require that you run the Resource Repair Action option on it. When a test is run on a resource in System Verification mode and that resource has an entry in the AIX error log, then, if the test on the resource was successful, the Resource Repair Action menu appears. After replacing that part, you must select the resource for that part from the Resource Repair Action menu. This updates the AIX error log to indicate that a system-detectable part has been replaced. Note: This changes the indicator light for the part from the Fault state to the Normal state. Complete these steps: a. From the Resource Repair Action menu, select the parent or child of the resource that has been replaced. If the repair action was reseating a cable or adapter, select the resource associated with that repair action. If the resource associated with your action does not appear on the resource list, select ″sysplanar0″ and press Enter. b. After you have made your selections, choose Commit. c. If the "No trouble found" display appears, go to Step 8. 8. If the operating system is not started, then start the operating system with the system or partition in normal mode. Were you able to start the operating system? No Contact your service provider. This ends the procedure. Yes This ends the procedure. 32 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide