IBM JS20 Hardware Maintenance Manual - Page 106
evaluation
UPC - 000435230263
View all IBM JS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Checkpoint FRU/action E143 (operating system bootlist set 1. Go to "Checkout procedure" on page 38. from management module bootlist) 2. System board and chassis. E149 (Create boot manager node) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E14A (build vital product data-to-operating system lookup table) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E14C (Create terminal emulator node) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E14D (Load boot image) v Go to "Boot problem resolution" on page 153. E150 (Create host (primary) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E151 (Probing PCI bus) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E152 (Probing for adapter FCODE; 1. Go to "Checkout procedure" on page 38. evaluate if present) 2. System board and chassis. E153 (End adapter FCODE probing 1. Go to "Checkout procedure" on page 38. and evaluation) 2. System board and chassis. E154 (Create PCI bridge node) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E155 (Probing PCI bridge secondary 1. Go to "Checkout procedure" on page 38. bus) 2. System board and chassis. E158 (Reserved) v Go to "General checkout" on page 37. E15B (Transfer control to operating v Go to "Boot problem resolution" on page 153. system (service mode boot)) E15F (Adapter VPD evaluation) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E170 (Beginning of PCI bus probe) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E172 (First pass of PCI device probe) 1. Go to "Checkout procedure" on page 38. 2. System board and chassis. E174 (Establishing host connection) 1. Verify that bootp server is correctly configured, then retry operation. 2. Verify that network connections are correct, then retry operation. 3. Go to "Checkout procedure" on page 38. 4. If no problems are found with bootp server or network, replace system board and chassis. E175 (Bootp request) 1. Verify that bootp server is correctly configured, then retry operation. 2. Verify that network connections are correct, then retry operation. 3. Go to "Checkout procedure" on page 38. 4. If no problems are found with bootp server or network, replace system board and chassis. 96 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide