Icom IC-7800 Instruction Manual - Page 104
Break-in function
View all Icom IC-7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
6 FUNCTIONS FOR TRANSMIT I Break-in function D Semi break-in operation [KEY SPEED] (inner control) [DELAY] (outer control) [VOX/BK-IN] [CW] The break-in function is used in CW mode to automatically toggle the transceiver between transmit and receive when keying. The IC-7800 is capable for full break-in or semi break-in. During semi break-in operation, the transceiver selects transmit when keying, then automatically returns to receive after a pre-set time after you stop keying. q Push [CW] to select CW or CW-R mode. w Push [VOX/BK-IN] several times to turn the semi break-in function ON. • "BK IN" appears. e Rotate [DELAY] to set the break-in delay time (the delay from transmit to receive). When using a paddle, rotate [KEY SPEED] to adjust the keying speed. D Full break-in operation During full break-in operation, the transceiver automatically selects transmit while keying and returns to receive immediately after keying is finished. q Push [CW] to select CW or CW-R mode. wPush [VOX/BK-IN] several times to turn the full break-in function ON. • "F-BK IN" appears. When using a paddle, rotate [KEY SPEED] to adjust the keying speed. 6-3